JRC JSS-2150 Instruction Manual page 75

6 6 . .
6 .
A N T
Press the
T U N E
- T blinks if the transmission frequency
Note
is not tuned.
- Even if
antenna before making a call.
- T lights during tuning. It goes out
after tuning.
7 7 . .
7 .
Lift the handset from the cradle.
8 8 . .
8 .
Press the PTT key to talk.
The TX and ON
show the equipment is transmitting. Releasing the
PTT key returns it to receiving.
Pressing the PTT key turns on the power
Note
to the PA automatically.
9 9 . .
9 .
When finished communicating, return the
handset to the cradle.
■
Making a radiotelephone call
1 1 . .
1 .
Set a frequency the station to be called is monitoring.
2 2 . .
2 .
Lift the handset from the cradle.
3 3 . .
3 .
Press the PTT key, check that
below.
Say the name of the station being called ... Repeat 3 times.

 Say "This is..."
 Say own ship name ... Repeat 3 times.
If necessary, indicate your working frequency.

 "over"
4 4 . .
4 .
Release the PTT key to listen.
5 5 . .
5 .
Start communicating according to the response. When changing frequencies, make
sure that no other stations are using the indicated working channel.
- When transmitting from your own station, always press the PTT key while talking.
Note
- On a simplex channel, always say "over" just before releasing the PTT key.
- Always say "out" when terminating communications.
key to tune the antenna.
T is not displayed, tune the
marks appear on the screen to
TX and
I D 4 3 1 0 0 1 2 3 4
P o s 8 9 ﾟ 5 9 . 0 1 2 3 ' N
CW
RX
TX
T
C o m m u n i c a t i n g o n
T i p ) U s e F U N C t o c h a n g e o p a r e a .
■
ON are displayed and make a call as described
2 3 : 5 9 ( U T C )
G
1 7 9 ﾟ 5 9 . 6 7 8 9 ' E @ 2 3 : 5 9
P
WR
ITU- 402 W 2 4 6 8 12 16
D KR
UP
4360.00
A COMM
kHz
4068.00
kHz
ON 12 -S N2
C W R x : 4 3 6 0 . 0 0 / T x : 4 0 6 8 . 0 0 k H z
[ H L D ] [ E N D ]
Operation
PS
4-9