Printer (Nkg-900) - JRC JSS-2150 Instruction Manual

10.7 Printer (NKG-900)

The print head of the NKG-900 printer may be very hot after printing. Do
not touch the print head of the printer. Make sure that the print head is cool
before replacing the paper or cleaning the print head.
Do not use the NKG-900 printer if there is no ink ribbon cartridge or paper.
Do not twist the ink ribbon when installing the ink ribbon cartridge.
To avoid malfunction, do not use the paper feed knob during power on.
Before opening and closing the cover of the NKG-900 printer, turn off the
printer. Wait more than 2 seconds after turning the printer off before turning it
back on again so it can initialize correctly.
Roll bar
Passes through the
Roll paper
printing roll paper.
Roll paper stand
Print head
Contacts the roll
paper for printing.
CAUTION
Roll support cover
Prevents printed roll
paper from
wound back in.
Roll paper cover
Printer cover
Operation panel
Power switch
(NKG-900 of the cover opened)
Options Operation
Friction lever
When replacing
paper, pull
toward the
inserting the paper, and
being
return it towards the back
after paper is inserted.
Roll paper cutter
the roll
this lever
front before
Paper feed knob
10-11