JRC JSS-2150 Instruction Manual page 196

Specifications
BAM interface
(4)
The terminals of the BAM (Bridge Alert Management) interface and the AME
interface are shared. Therefore, to use BAM alerts, it is necessary to set AME
function OFF and BAM function ON when equipped.
the setting, consult with us or our agents.
Interface standard
Protocol
Number of interfaces
Output sentence
(Device ID ="CT")
Input sentence
9-16
CAUTION
IEC61162-1 compliant
4800 bps, start 1 bit, data 8 bit, stop 1 bit
Non-parity
1 port
ALC: Cyclic alert list
ALF: Alert sentence
ARC: Alert command refused
ACN: Alert command
HBT: Heartbeat supervision sentence
If you need to change