Starting And Shutting Down The Docucolor; Starting The Docucolor - Xerox DocuColor 5750 User Manual

Docucolor color server digital copier printer

Hide thumbs Also See for DocuColor 5750:

Table of Contents

1-6 Operating the DocuColor

Power switch in the

off position

Resume Printing

Resume communication between the copier and the

DocuColor after you have ﬁnished making copies.

Run Diagnostics

This command is provided for service representatives. Use

the line selection buttons to select the diagnostic test you

want to run and choose

service/support technician for information about these

diagnostics.

Reboot Server

Shut down all DocuColor activity in the correct manner

and then restart. You should use this option instead of the

switch on the rear of the DocuColor.

Starting and shutting down the DocuColor

Generally, you can leave the DocuColor running all the time. This section describes

how to shut down and restart the DocuColor when necessary.

To start the DocuColor, move the switch on the rear of the DocuColor to the On

position.

Diagnostic messages appear on the Control Panel. If any diagnostics fail, more

information and instructions appear. Contact your service representative if the

DocuColor encounters problems while running the diagnostics.

. Contact your authorized

Table of Contents