Xerox DocuColor 5750 User Manual page 65

A
A-1 Error Messages
Appendix A:
Error Messages
When an error interferes with printing, you will see a message on the DocuColor
Control Panel. Following are the messages (listed in alphabetical order), with the
appropriate corrective action for each one.
Message
Accessory disabled
Busy (Copier)
Check power & cable
Copier needs attn
Copier offline
Copier running
Door open
Fuser web empty
Ld ___ in bypass
Corrective action/additional information
The print job calls for a copier accessory (such as a sorter),
which is either disabled or not available.
The DocuColor has received a print job, but the copier is
busy copying or performing a non-printing related task.
The job will print when the copier finishes that task.
There is a problem with the copier power or cable
connection. First check to make sure that the copier is
turned on. There may also be a problem with the cable
connection between the DocuColor and the copier. Make
sure that the cable has not come loose. The DocuColor
will resume printing when the cable is securely connected
to both the DocuColor and the copier.
There is an unidentified problem with the copier. See the
copier user interface for additional messages. The copier
will resume printing when the problem is corrected.
Someone has selected
Suspend Printing
menu on the DocuColor Control Panel. When you select
at the Control Panel, printing will resume
Resume Printing
normally.
The copier is scanning or making a copy.
One of the copier doors is open. Printing will resume
when the door is closed.
The copier's fuser web is empty, and needs replenishing.
Contact your authorized service technician.
The copier's bypass tray is not loaded with the paper size
or type specified. The DocuColor will print when the
bypass tray is loaded with the required paper.
from the Functions