Table of Contents
Advertisement
Serial Communication, cont'd
Updating the Firmware
Extron periodically updates product firmware in conjunction
with the release of new software revisions. When updating any
Extron software to the latest revision level, be sure to read the
supplied release notes or contact an Extron Application Engineer
to determine if your Extron product requires a firmware update.
You can find out what version of firmware is currently loaded
on your switcher by entering the SIS "Q" command via the
RS-232 interface (see "Using Simple Instruction Set (SIS)
Commands," earlier in this chapter).
Downloading the firmware
To obtain the latest version of firmware for your switcher,
1.
2.
3.
4.
5.
6.
7.
SW4 3G HD-SDI • Serial Communication
3-8
Go to the Extron Web site at www.extron.com and click the
Download tab.
From the left sidebar menu, click the Firmware link.
On the next Download Center screen, click the Download
link for the SW4 3G SD-HDI.
On the next screen, enter the requested information, then
click the Download button below.
Follow the instructions on the rest of the download screens
to save the executable file to your computer. Note the
folder to which you saved the file.
In Windows Explorer or another file browser, locate the
downloaded executable file, and double-click it to open it.
Follow the instructions on the Installation Wizard screens
to install the new firmware on your computer. A Release
Notes file, giving information on what has changed in the
new firmware version, along with a set of instructions for
updating the firmware, are also loaded.
Advertisement
Table of Contents
