Extron electronics SW4 3G HD-SDI User Manual page 22

Installation and Operation, cont'd
AUTO
SWITCH
ACTIVE
Turning on auto-input switch mode
To select normal mode (turn auto-input switch mode off),
1.
2.
3.
AUTO
SWITCH
ACTIVE
Turning off auto-input switch mode
N
SW4 3G HD-SDI • Installation and Operation
2-8
1
MODE NORMAL
The Auto Switch Active LED lights, indicating that
auto-input switching is enabled.
Press and hold the Mode (Input 1) button.
While holding down the Mode button, press and hold the
Normal (Input 2) button.
Release the Mode and Normal buttons simultaneously.
1
MODE NORMAL
The Auto Switch Active LED turns off, and the switcher
switches to the previously selected input.
If power is disconnected from the switcher, the unit retains
mode and input settings.
2 3 4
AUTO
2 3 4
AUTO
RATE
NOT
RECOGNIZED
2.97 Gbps
1.485 Gbps
270 Mbps
SW4 3G HD-SDI
MULTI-RATE SDI SWITCHER
RATE
NOT
RECOGNIZED
2.97 Gbps
1.485 Gbps
270 Mbps
SW4 3G HD-SDI
MULTI-RATE SDI SWITCHER