Download Print this page
Extron electronics SW2 ARxi Specifications
Extron electronics SW2 ARxi Specifications

Extron electronics SW2 ARxi Specifications

Extron electronics switchers specification sheet
Hide thumbs Also See for SW2 ARxi:

Advertisement

Quick Links

Specifications — SW2 ARxi xi xi xi xi and SW4 ARxi xi xi xi xi Switchers
Video
Gain ............................................... Unity
Bandwidth .................................... 350 MHz (-3dB)
Switching speed ........................... 5 mS (max.)

Video input

Number/signal type ................... 2 (SW 2 ARxi) or 4 (SW 4 ARxi) RGBS, RGsB, RsGsBs, component video, S-video,
Connectors .................................... 2 (SW 2 ARxi) or 4 (SW 4 ARxi) x 4 BNC female
Minimum/maximum levels ...... Analog ....... 0.3V to 1.5V p-p with no offset
Impedance .................................... 75 ohms
Horizontal frequency .................. 15 kHz to 145 kHz
Vertical frequency ....................... 30 Hz to 170 Hz
Return loss .................................... -30dB @ 5 MHz

Video output

Number/signal type ................... 1 RGBS, RGsB, RsGsBs, component video, S-video, NTSC/PAL/SECAM
Connectors .................................... 4 BNC female
Minimum/maximum levels ...... Analog ....... 0.3V to 1.5V p-p
Impedance .................................... 75 ohms
Sync
Input type ..................................... Analog RGBS, RGsB, RsGsBs
Output type .................................. RGBS, RGsB, RsGsBs
Standards ...................................... NTSC, PAL, SECAM
Input level ..................................... 1V to 5V p-p
Output level .................................. 5V p-p
Input impedance .......................... 510 ohms
Output impedance ...................... 75 ohms
Polarity .......................................... Positive and negative
Control/remote — switcher
Contact closure ............................ 1 25-pin D female connector
Extron remote key pad control .. 1 25-pin D female connector ........... use with the Extron KP-10
IR controller module ................... 1 25-pin D female connector ........... use with the Extron IR-101
General
Power ............................................. 100VAC to 240VAC, 50/60 Hz, 10 watts, internal, auto-switchable
Temperature/humidity .............. Storage -40° to +158°F (-40° to +70°C) / 10% to 90%, non-condensing
Rack mount ................................... Yes (2U high, ½-rack width), with optional shelf, part #60-030-01
Enclosure type .............................. Metal
Enclosure dimensions ................. 3.4" H x 8.4" W x 6.25" D
Shipping weight ........................... 5 lbs (2.3 kg)
Vibration ....................................... ISTA/NSTA 1A in carton (International Safe Transit Association)
Approvals ..................................... UL, CUL, CE
MTBF ............................................. 30,000 hours
Warranty ....................................... 2 years parts and labor
Specifications are subject to change without notice.
1-2
SW2 ARxi xi xi xi xi and SW4 ARxi xi xi xi xi Switchers • Specifications
NTSC/PAL/SECAM composite video
composite video
Operating +32° to +122°F (0° to +50°C) / 10% to 90%, non-condensing
8.5 cm H x 21 cm W x 16 cm D
(Depth excludes connectors.)
(7.2-052101-D3)

Advertisement

loading

This manual is also suitable for:

Sw4 arxi