Drive Clutch; Drive Clutch Removal - Club Car Turf 252 2007 Maintenance And Service Manual

Hide thumbs Also See for Turf 252 2007:
Table of Contents

Advertisement

21

Drive Clutch

DRIVE CLUTCH
See General Warning on page 1-1.
CAUTION
• Be very careful when handling the clutches. A clutch that has been dropped will not be properly
balanced. If either clutch is dropped, assume that it is damaged and replace it.

DRIVE CLUTCH REMOVAL

1.
Remove the drive belt as instructed. See Drive Belt Removal on page 21-3.
2.
Loosen the starter/generator mounting and adjusting hardware and then remove the starter belt. See WARNING
"Moving parts! Do not..." in General Warning on page 1-1.
595
Figure 21-3 Loosen Retaining Bolt
3.
Place chocks at the front wheels and lift the rear of the vehicle with a chain hoist or floor jack. Place jack stands
under the axle tubes to support the vehicle. This will allow the weight of the centerline of the drive clutch to drop
below the frame I-beam for access to the bolt securing the drive clutch. See following WARNING.
Page 21-4
2007-2009 Turf 252, Carryall 252 and XRT 900 Maintenance and Service Manual
1
2
3
596
TORQUE CONVERTER: GASOLINE VEHICLES
2
Figure 21-4 Drive Clutch Removal
1
(CCI P/N 1014496)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents