4. Access to Maintenance and Personalization Data
Output Personalization
Function
Output voltage
(1)
Frequency converter
Output frequency
Transfer to the bypass
AC input
(1)
Overload level
(1)
ON/OFF Personalization
Function
Start on battery power Enabled
Automatic restart
Energy savings
Detection of phase/
neutral inversion
(SWF)
Battery Personalization
Function
Battery test
Selection of the
backup time
Battery protection
against excessive
discharges
4.4
Personalization Using External Software
Insert the Solution-Pac CD-ROM in the drive.
On the first navigation screen, select "Point to Point solution" and follow the instructions on how to install the
Personal Solution-Pac software.
Then select "Settings", "Advanced settings" and "UPS settings".
Note that the Linux/Unix/MacOS versions of the Personal Solution-Pac software do not offer this possibility.
(1). These Parameters may be modified only when the UPS is OFF.
(2). Bypass is disabled when frequency converter is enabled.
86-86710-00EN A02 - Page 22
86-86710-00 A02 UM.indd 22
Factory Setting
Options
100 VAC
100/104/110/120/125 VAC
Disabled
Enabled
(1)
Automatic selection
50 or 60 Hz
(1)
Bypass AC power must be
Bypass AC power may be
within tolances
outside tolerances
102%
50 / 70%
Factory Setting
Options
Disabled
Enabled
Disabled
Disabled
Enabled
Enabled
Disabled
Factory Setting
Options
No test / daily test / monthly
Weekly test
test
Automatic detection of
0 to 200 Ah
number of battery modules
Enabled
Disabled
Comments
The connected devices are never
(2)
transferred to the bypass.
User selectable only if the
frequency-converter function is
enabled.
Alarm if threshold is overrun.
Comments
The UPS restarts automatically
when AC power returns.
When function enabled, battery
shuts down when power drops
to <5%.
When function enabled, the UPS
remains OFF if the system detects
phase/neutral inversion.
Comments
UPS restarts automatically when
Normal AC source is restored.
When function disabled, EATON
warranty no longer applies.
18
14/01/2009 10:56:28
86-86710-00