Brady Bradyprinter THT 200M-e User Manual page 83

:DUQLQJ ³ +HDG &ROG
Problem
The printhead is under temperature.
:DUQLQJ ³ &XWWHU -DPPHG
Problem
Cutter blade is in the media path.
2XW RI 0HPRU\
Problem
*There is not enough memory to perform the
function shown on the second line of the error
message.
Bradyprinter 200M-e and 200M-e 300 User's Guide
All manuals and user guides at all-guides.com
Continue printing while the printhead reaches the correct
operating temperature. If the error remains, the
environment may be too cold for proper printing. Relocate
the printer to a warmer area.
Turn off the printer power and unplug the printer. Inspect
the cutter module for debris and clean as needed following
the cleaning instructions on page 68.
Insufficient memory for the label length, downloaded
fonts/graphics, and images.
Ensure that the device, such as FLASH memory or
PCMCIA card, is installed and not write protected or full.
Ensure that the data is not directed to a device that is not
installed or available.
Solution
Solution
Solution
73