Brady Bradyprinter THT 200M-e User Manual page 37

5ROO 0HGLD /RDGLQJ
NOTE: A calibration must be performed when media and ribbon
(if used) are first installed in the printer, or if a different type of
media or ribbon is being used.
7HDU2II 0RGH
Refer to Figure 15.
1. Open the printhead.
2. Slide the media guide and media supply guide as far from the printer
frame as possible.
3. Load media as shown.
4. Slide in the media guide and media supply guide so they just touch,
but don't restrict, the edge of the roll.
5. Close the printhead.
Bradyprinter 200M-e and 200M-e 300 User's Guide
All manuals and user guides at all-guides.com
Figure 15
27