Table of Contents
Advertisement
)URQW 3DQHO /LJKWV
NOTE: If two operating conditions occur simultaneously (for
example, one that causes a light to be on constantly and one that
causes the same light to flash), the light flashes.
Light
Status
POWER
Off
On
TAKE LABEL
Off
Flashing
ERROR
Off
Flashing
CHECK
Off
RIBBON
On
PAPER OUT
Off
On
PAUSE
Off
On
Off
On
DATA
Flashing
26
All manuals and user guides at all-guides.com
The printer is off or power is not applied.
The printer is on.
Normal operation.
(Peel-off mode only.) The label is available. Printing is paused until the
label is removed.
Normal operation — no printer errors.
A printer error exists. Check the display screen for more information.
Normal operation — ribbon (if used) is properly loaded.
Printing is paused, the front panel displays a warning message, and the
PAUSE light is on.
• If the printer is in direct thermal mode: Ribbon is loaded.
• If the printer is in thermal transfer mode: No ribbon is loaded.
Normal operation — media is properly loaded.
No media is under the media sensor. Printing is paused, the display
shows an error message, and the PAUSE light is on.
Normal operation.
The printer has stopped all printing operations. Either the PAUSE key
was pressed, a pause command was included in the label format, the
on-line verifier detected an error, or a printer error was detected. Refer
to the display screen for more information.
Normal operation. No data being received or processed.
Data processing or printing is taking place. No data is being received.
The printer is receiving data from or sending status information to the
host computer. Flashing slows when the printer cannot accept more
data, but returns to normal once data is again being received.
Bradyprinter 200M-e and 200M-e 300 User's Guide
Indication
Advertisement
Table of Contents
