Serial Comm - Brady Bradyprinter THT 200M-e User Manual

Setting Communication Parameters
Communication parameters must be set correctly for the printer to communicate with the host computer.
These parameters make sure that the printer and host computer are "speaking the same language." All
communications parameters are password protected.
Press Display Shows

SERIAL COMM

BAUD
DATA BITS
52
All manuals and user guides at all-guides.com
Setting Serial Communications: Press the (+) or (–) key to
display other choices.
Default: RS-232
Selections: RS-232, RS-422/485, RS-485 multidrop
Select the communications port that matches the one being used
by the host computer.
Setting Baud: Press the (+) or (–) key to display other choices.
Default: 9600
Selections: 110, 300, 600, 1200, 2400, 4800, 9600, 14400,
19200, 28800, 38400, 57600
The baud setting of the printer must match the baud setting of the
host computer for accurate communications to take place. Select
the value that matches the one being used by the host computer.
Setting Data Bits: Press the (+) or (–) key to display other
choices.
Default: 7-bits
Selections: 7-bits, 8-bits
The data bits of the printer must match the data bits of the host
computer for accurate communications to take place. Set the
data bits to match the setting being used by the host computer.
NOTE: Must be set to 8 data bits to use Code Page 850.
Bradyprinter 200M-e and 200M-e 300 User's Guide
Action/Explanation