Table of Contents
Advertisement
&OHDQLQJ WKH 6QDS 3ODWH
Clean the snap plate to remove label adhesive or a label that has adhered to
the underside of the snap plate.
Refer to Figure 28.
1. Insert a small-blade screwdriver or similar tool into the loop on the left
side of the snap plate. Lift the snap plate.
2. Repeat step one on the right side of the snap plate.
3. Remove the snap plate from the printer.
4. Clean the snap plate with cleaning solvent and a soft cloth.
66
All manuals and user guides at all-guides.com
CAUTION: Take care not to bend, twist, or otherwise deform
the loops!
Figure 28
Bradyprinter 200M-e and 200M-e 300 User's Guide
Advertisement
Table of Contents
