Table of Contents
Advertisement
Increase TOF
Decrease Left Margin Offset
Note: It is best to over bleed as little as possible to avoid excess ink on the label backing. Also, over
bleeding too much will cause the printer to skip labels, because the printer stops printing too
late to sense the next label.
Orientation
There are two settings for orientation - portrait and landscape. If your text and graphics print left to right
or as shown on the screen, select portrait. If you wish your printing to rotate 90 degrees from what you
see on the screen, so it is printing horizontally, select landscape as your orientation. Remember, this
does not change the width and height in the paper size setting. It is only a tool for viewing a label
upright on screen that will be printed sideways on the printer.
BradyJet J4000 User Manual
Portrait
Actual Label Size
2 x 2
Over Bleed Page Size
Landscape
Orientation
Printer Driver
28
Advertisement
Table of Contents
