Using The Cost Estimator - Brady BradyJet J4000 User Manual

Using the Cost Estimator

The cost estimator is found under the queue section on the first tab of the Brady PrintHub. The last five
job costs are stored in the list. Each job will show the approximate cost per label based on the cost per
cartridge entered below the list. Enter the actual cost of the cartridge you paid. Prints remaining on the
currently installed cartridge and total prints on new cartridge are both displayed.
To see a printable/saveable report click on the document icon next to the job you want to see. A report
will display the information. You can print or save the report from this screen. You can also change the
currency using the drop down, change the job name or adjust the cost from this screen.
IMPORTANT!
BradyJet J4000 User Manual
The cost per label represents the average cost per label over an entire run of
labels. This means that the per label cost will decrease and become more accurate
as the number of labels printed increases. This is because the ink that is used for
periodic cartridge maintenance is divided into a larger number of labels. It is
recommended to print at least 5 labels for an accurate per label cost.
Cut Options
Using the Cost Estimator
25