Table of Contents
Advertisement
Top of Form (TOF) This value moves the print start position up or down on the label. If fine tuning is
needed, increase this setting to move the image down on the label or decrease to move the image up
on the label. The unit of measure is 0.1mm.
•
Add to the current value to move the printed label down or toward the printer.
•
Subtract from the current value to move the printed label up or away from the printer.
The value is automatically saved as soon as you set it.
Left Offset
BradyJet J4000 User Manual
(10 units)
TOF
1.0 mm
You may have to make several adjustments to one or more of
these values. After each adjustment you can click the test
button to print a small test pattern on the label. This will help
you find the proper alignment value.
Adjusting Print Alignment
20
Advertisement
Table of Contents
