Table of Contents
Advertisement
Problem
Operating
Green LED flashing
Red LED flashing
No soap comes out
Green LED solid on
-
-
-
-
-
-
-
Soap won't
stop running
-
-
Soap comes out
unexpectedlly
-
Amount of dispensed
-
soap is small
Type
Power supply
Sensor detection range
Ambient temperature
Humidity
Soap volume
Tank capacity
AC adaptor
Input
Output
Correct Disposal of this product
TROUBLESHOOTING
Soap is low
Battery is low
Pump is sticking
Soap viscosity is high
Sensor window is dirty
Sensor cable is disconnected
There is an obstruction in front of sensor window
Power supply (AC adapter or battery box) is disconnected
Tube is disconnected
AC adapter is not plugged in
Sensor window is dirty
There is an obstruction in front of sensor window
Sensor window is dirty
Soap will be automatic dispersed after 48 hours of non-usage to
prevent clogging.
Pump is not working correctly
SPECIFICATIONS
DSE101EEB
AC
AC 100~240V
GPBSW0601500WD00
100-240 VAC, 50/60 Hz
6,0 VDC, 1500 mA
CAUTION
This marking indicates that this product should not be disposed with other household
wastes throughout the EU. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources. To return your used device, please use the
return and collection systems or contact the retailer where the product was purchased.
They can take this product for environmental safe recycling.
14
Cause
DSE101EEC
AC
AC 100~240V
5-7/8"±5/8"(150mm±15mm)
32~104°F (1~40°C)
Max. 90% RH
0.03-0.04 oz (0.8-1.2ml)
50 oz (1500ml)
GPUSW0601500WD00
Solution
Fill tank with liquid soap.
Replace batteries.
Clean the pump unit.
Change to TOTO
approved liquid soap.
Clean sensor window.
Connect cable.
Remove the obstruction.
Connect cable.
Connect tube.
Plug in the AC adapter.
Clean sensor window.
Remove the obstruction.
Clean sensor window.
-
Clean the pump unit.
DSE101KE
DC
4×D 1.5V alkaline batteries
/
/
/
Advertisement
Table of Contents
