Toto DSE101EEB Installation And Owner's Manual page 7

Table of Contents

Advertisement

4.Insert self-tapping screws into the upper
two holes until there is a 1/4"(6mm) gap
between head of screw and wall.
Use wall plugs if necessary.
5.Remove the tank from controller.
6.Hang the controller on the
two screws.
7.Insert a self-tapping screw through
bottom hole of controller and tighten.
Self-tapping screw
6
1/4"
(6mm)
Controller
Tank

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dse101eecDse101ke

Table of Contents