Toto DSE101EEB Installation And Owner's Manual page 8

8.Connect sensor cables.
1.Remove pump unit from the tank.
2.Slowly pour liquid soap into the tank.
Keep pump unit clean while filling
NOTE:
soap, especially keep tube of
pump off from floor.
NOTE: Fill the tank up to MAX fill line.
NOTE: Use only TOTO approved liquid soap.
3.Replace the pump by pushing it down firmly
over the tank opening until it snaps in place.
INSTALLATION PROCEDURE - Tank
Tube
Pump Unit
Tube
7
Sensor cable
from spout
Sensor cable
from controller
Liquid soap
MAX fill line
Tank