Engine And Generator - Yamaha EF2800i Service Manual

ENGINE AND GENERATOR

1 Ground terminal
2 Control unit
3 AC-CDI unit
4 Rectifier
È Tighten the ground terminal so that it faces upward.
É Pass the clamp through the hole of the fan case
cover, and then fasten the lead wires.
WIRE ROUTING DIAGRAM
Ê Connect the coupler, and then store them in the
space located above the control unit.
Ë Coupler storage space
Ì Connect the lead wires, and then fasten them
with a clamp.
Í Store the AC-CDI connector (red) vertically
along the end of the storage space.
5-10
SPEC
SVU5040