Magneto Rotor And Stator Coil Assembly Removal - Yamaha EF2800i Service Manual

1
SVU3440
2
a
GENERATOR
MAGNETO ROTOR AND STATOR COIL
ASSEMBLY REMOVAL
CAUTION:
The magnetic force of the magneto rotor is
very strong. Therefore, be sure to remove
the magneto rotor and stator coil assembly
together as a set, otherwise they may be
damaged.
1. Remove:
• Magneto rotor nut 1
NOTE:
Attach the primary sheave holder 2 to hold
2
the magneto rotor.
2. Remove:
• Stator coil assembly bolts 1
NOTE:
Turn the magneto rotor until the stator coil
assembly bolts are visible through the holes in
1
the rotor, and then remove the bolts.
SVU3442
3. Remove:
• Stator coil assembly bolts 2
• Tubes
NOTE:
2
• Turn the magneto rotor until the stator coil
assembly bolts are visible through the holes
in the rotor, and then remove the bolts.
• Align the keyway a of the magneto rotor
with the stator coil assembly bolts 2 so that
SVU3445
they are in a straight line. The piston is at
top dead center when keyway and bolts are
in this position.
3-25
ENG
Sheave holder:
YS-01880, 90890-01701