Yamaha EF2800i Service Manual page 100

1 Spark plug cap
2 Oil level switch
3 Pulser coil
4 Ground terminal
5 Ignition coil
6 Clamp
WIRE ROUTING DIAGRAM
È Install the spark plug cap.
É Route the oil level switch lead as shown.
Ê Pass the leads through the hole, install and
tighten the clamp, and then insert it in the grom-
met into the hole.
Ë Connect the ground lead connector to the igni-
tion coil, and then tighten the ground lead termi-
nal together with the pulser coil.
5-11
SPEC
SVU5050