How To Assemble; Hose Assembly And Tool Storage - Dirt Devil Swivel Glide Owner's Manual

1.

HOW TO ASSEMBLE

1. Stand unit in upright position and place upper handle onto upright (Diagram 1).
2. Hold cord down and out of the way to avoid pinching. P
3. BACK OF UPRIGHT: add TWO screws (supplied) to secure handle (Diagram 3).
1.

HOSE ASSEMBLY AND TOOL STORAGE

1. ATTACH HOSE: Attach the flexible hose to the cleaner (Diagram 1). Match the long arrow on the cuff to the arrow on the inlet (Diagram 1a).
Push down firmly on the cuff
2. ATTACH TOOLS: Refer to page 4 (Fig. 4 or 5) for tool placement.
3. CORD STORAGE: For tidy cord storage, wrap cord around hooks on side of cleaner with quick cord release (Diagram 2).
*Not available on all models
2.
TOOL REQUIRED: PHILLIPS SCREWDRIVER
ush upper handle onto upright, aligning
Hose
Inlet
and turn clockwise. Insert the hose handle into the side of the cleaner.
1a.
Line up slots
with tabs on
hose inlet
5
3.
on/off switch with handle ope ning (Diagram 2).
2.
Press down firmly to secure (Diagram 2).
Back of
upright
screws