How To Assemble; Handle; Tool Storage - Dirt Devil M086035 Owner's Manual

HOW TO ASSEMBLE
TOOL REQUIRED: PHILLIPS SCREWDRIVER
HANDLE ASSEMBLY
1. 2.
Stand unit in upright Secure the handle by
position, align tabs on installing the three (3)
either side on the handle screws provided into
and push down. the holes on the back
of the unit. Make sure
to fully tighten screws.
TOOL STORAGE
3. 3a.
Attach Tools: Place dust brush (A) onto peg on the tool
caddy with bristles facing out (Diagram 3). Slide the
extension wand (B)/ crevice tool (C) (stored inside of
extension wand) through the ring on the back left side
of tool caddy (Diagram 3a).
HOSE ASSEMBLY
1. 2.
Place hose onto hose Insert the hose grip into
wrap (located on back the side of the cleaner.
of handle) to secure. Pres down frimly to
secure. NOTE: A slight
twisting motion may
help.
6