Features; How To Assemble; Handle; Tool Storage - Dirt Devil M086020 Owner's Manual

FEATURES

FRONT
1
2
3
11
4
5
6
10
9
8
7
FRONT
1. Handle Grip
2. Power Brush Tool
3. Front Panel Release Lever
4. Front Panel
5. Filter Cage
6. Headlight
7. Scuff Guard Bumper
™
8. Brush View Window
9. Carpet Height Adjustment Knob
10. Hose Grip
11. Full Bag Indicator
BACK
14
22
21
20
19
BACK
12. Upper Cord Wrap with Quick
Cord Release
13. Long Power Cord
14. Hose Wrap/Carry Handle
15. Crevice Tool
(inside extension wand)
16. Extension Wand
17. L ower Cord Wrap
18. Stretch Hose
19. Swivel Casters
™
20. Handle Release Pedal
21. On/Off Pedal
22. Dust Brush
5
TOOL REQUIRED: PHILLIPS SCREWDRIVER
1.
12
13
Pull release lever on front
panel to remove front panel
from body of cleaner.
15
16
4.
17
18
Secure the handle by
installing the two (2)
screws provided into the
holes on the front of the
unit. Make sure to fully
19
tighten screws.
3.
Attach front panel by
aligning 2 tabs on front
panel with 2 slots on body
of cleaner. Secure front
panel by snapping into
place.
HOW TO ASSEMBLE
HANDLE ASSEMBLY
2.
Stand unit in upright position
and insert handle into the
hole on the top of the back
panel.
HOSE ASSEMBLY
1.
Place hose onto hose wrap
(located on back of handle)
to secure.
TOOL STORAGE
4.
4a.
C
D
B
A
BACK FRONT
Attach Tools: Place dust brush (A) onto
peg on the tool caddy with bristles facing
out. Slide the extension wand (B)/ crevice
tool (C) (stored inside of extension wand)
through the ring on the back right side of
tool caddy (Diagram 4). Clip Power Brush
Tool (D) into the power brush tool caddy on
the front of the handle (Diagram 4a).
6
3.
Insert carry handle into back
panel opening at the top of
the back panel.
2.
Insert the hose grip into
the side of the cleaner.
Press down firmly to
secure. NOTE: A slight
twisting motion may help.
CORD STORAGE
5.
For tidy cord storage,
wrap cord around hooks
on back of cleaner. The
quick cord release turns
for easy access to the
cord.