Troubleshooting Guide - Dirt Devil Swivel Glide Owner's Manual

Dirt devil swivel glide owner's manual
Hide thumbs Also See for Swivel Glide:
Table of Contents

Advertisement

Problem
Cleaner won't run
Cleaner won't pick-up
or low suction
OR
Dust escaping from cleaner
Installation - Pg. 5.
Cleaner tools won't pick up
Headlight not working
Cleaner is difficult to push
Belt burns or breaks
ANY OTHER SERVICING SHOULD BE DONE BY AN AUTHORIZED SERVICE REPRESENTATIVE
In the event that further assistance is required, see your Yellow Pages for an authorized Royal
any place of repair are to be paid by the owner. The service parts used in this unit are easily replaced and readily available
Royal
®
Dealer or retailer. Always identify your cleaner by the model number and manufacturing code when requesting information or or
replacement parts. (The model number appears on the back of the cleaner.)

TROUBLESHOOTING GUIDE

IMPORTANT: UNPLUG CLEANER BEFORE SERVICING
Possible Reasons
1. Power cord not firmly plugged into outlet.
2. Blown fuse or tripped breaker.
3. Needs service.
4. Motor Protector tripped.
1. Paper bag is not opened.
2. Paper bag full.
3. Brushroll worn.
4. Broken or worn belt.
5. Clogged filter pad.
6. Nozzle/dirt passage clogged.
7. Carpet height setting is incorrect.
8. No paper bag.
9. Bag inlet clogged.
1. Paper bag full.
2. Bag not installed correctly.
3. Puncture/hole in paper bag.
4. No bag in cleaner.
5.
1. Hose clogged.
2. Bag inlet clogged.
3. Paper bag full.
4. No bag in cleaner , filter clogged.
1. Bulb burnt out.
2. Loose electrical wires.
1. Carpet height setting is incorrect.
1. Brush may be jammed with
debris.
2. Brush end caps are clogged with
3. Carpet Height Setting is incorrect.
CUSTOMER SERVICE
Possible Solutions
1. Plug unit in firmly.
2. Check fuse or breaker in home. Replace fuse/reset breaker.
3. Take to service center or call 1-800-321-1 134.
4.
Clog indicator light - Pg. 3.
1.
Insert finger into hole and push paper away from opening.
2. Replace paper bag - Pg. 7.
3.
Replace brushroll- Pg. 8.
4.
Replace belt - Pg. 8.
5.
Replace filter - Pg. 7.
6. Remove base nozzle cover - Pg. 8; remove obstruction
Remove hose; remove obstruction - Pg. 5.
7. Set carpet height adjustment to appropriate
setting for carpet being cleaned - Pg. 6.
8. Clean filter & install bag - Pg. 7.
9.
Remove hose & paper bag and clean inlet - Pg. 3, 7.
1. Replace paper bag - Pg. 7.
2. R
eview paper bag installation - Pg. 7.
3.
Replace paper bag - Pg.7. Clean/Replace Filter - Pg. 7.
4. Install bag & clean filter - Pg. 7.
Hose not installed correctly.
1. Remove hose and tools; remove obstruction - Pg. 3.
2.
Remove hose & paper bag and clean inlet - Pg. 3, 7.
3. Replace paper bag - Pg. 7.
4.
Install paper bag & clean filter - Pg. 7.
1.
Replace bulb - Pg. 8.
2. Call 1-800-321-1 134 for nearest authorized Royal
1. Set carpet height adjustment to appropriate
setting for carpet being cleaned - Pg. 6.
1. Remove brush - Pg. 8. Clean brush of debris.
debris.
2. Remove brush. Determine if end caps rotate freely. If
not, replace brushroll - Pg. 8.
3. Set Carpet Height adjustment to appropriate setting for
carpet being cleaned - Pg. 6.
(1-800-321-1134)
®
Dealer. Costs of any transportation to and from
9
5.
Review Hose
®
Dealer.
from an authorized
dering

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents