Features; How To Assemble - Dirt Devil Swivel Glide Vision M088920 Owner's Manual

FEATURES

FRONT
1
2
3
4
5
16
6
7
8
15
9
10
11
12
13
14
FRONT
1. Handle Grip
2. Handle
3. Power Brush Tool Caddy
4. Power Brush Tool
5. Hose
6. Dirt Container Release Button
7. Dirt Container Filter
8. Carry Handle
9. Dirt Container
10. Clean Release Dirt Container Button
11. Headlight
12. Height Adjust Knob
13. Brush View Window
14. Bumper
15. Extension Wand (may come pre-attached)
16. Crevice Tool (inside extension wand)
BACK
28
18
27
19
26
25
24
23
BACK
17. Hose Wrap
18. Cord Wrap With Quick Cord
Release
19. Long Power Cord
20. Hose Wand
21. Lower Cord Wrap
22. Swivel Casters ™
23. Handle Release Pedal
24. On/Off Pedal
25. Dust Brush
26. Back Panel
27. Cord Guide
5
TOOL REQUIRED: PHILLIPS OR FLAT HEAD SCREWDRIVER
BODY TO NOZZLE
1.
FRONT
VIEW OF
CLEANER
HANDLE ASSEMBLY
1.
20
21
22
Place upper handle onto
top of cleaner.
23
INSTALL DIRT CONTAINER
2.
SLOT TAB
Set aligning tab on bottom of dirt container
into rectangular slot on cleaner (Diagram
2). Rotate dirt container into cleaner and
push to snap into place (Diagram 2a).

HOW TO ASSEMBLE

2.
Slide the back panel
onto base.
SECURE BACK HOSE
2.
1.
Insert the two (2) long Wrap hose around back of hose caddy (Diagram
screws into the back of the 1). Push hose wand down into the right side of
handle and tighten, making cleaner (Diagram 1a).
sure the handle is secure.
TOOL STORAGE
2a. 3.
A
BACK
Attach Tools: Slide the dust brush (A) into
hole/ring on the tool caddy with bristles facing
out (Diagram 3). Slide the extension wand
(B)/crevice tool (C) (stored inside of extension
wand) through the ring on the front right side of
tool caddy. Clip Power Brush Tool (D) onto the
front of the Power Brush Tool caddy (Diagram 3a).
6
To secure, insert two
(2) short screws into
the back of the back
panel.
1a.
3a.
C
D
B
FRONT