Step 3: Unlocking The Scanner; Step 4: Connecting The Scanner; To The Adf; To The Power Adapter - Microtek ArtixScanDI 2015c User Manual

Step 3: Unlocking the Scanner

1. Remove the yellow "Step 3" sticker from your scanner.
2. When the scanner is powered off, tilt the front right corner of the scanner to
see the locking switch at the bottom.
3. Push the locking switch to the position as indicated in the graphic, with the
icon on the lock showing as "unlocked".
Note: To lock the scanner (for shipping and other purposes), follow the steps
below:
1. Turn off the scanner.
2. Tilt the front right corner of the scanner to see the locking switch at the
bottom.
3. Push the locking switch to the position as indicated in the graphic, with the
icon on the lock showing as "locked".

Step 4: Connecting the Scanner

To the ADF

Make the Automatic Document Feeder
(ADF) is properly installed, with its
connector securely connected to the
scanner's 15-pin accessory port.

To the Power Adapter

1. Remove the yellow "Step 4" sticker
from your scanner.
2. Connect the power adapter to the back of the scanner.
3. Plug one end of the power cord into the power adapter, and plug the other
end of the power cord into a wall outlet or other power source.
Unlocked
ArtixScan DI 2015c User's Manual
Locked
13