Table of Contents
Advertisement
–
Select Auto Color Detection to scan the image in color or non-color
based on the automatic judgement and detection of the system.
– Select Complex to scan the image in color, grayscale or non-color
based on the customization.
c)
Select a dimension in the Paper Size as
your preview image size.
d)
Select a desired resolution in the
Resolution for your image output
resolution.
e)
If "Auto-crop" & "Auto-deskew" is
selected, the scanner automatically
detects the size of the original image,
crops the full scan frame to fit the image,
and removes unwanted black borders after
the scan, as well as corrects the distorted
image for proper alignment.
5. Click the Show Preview Window and Show Setting Window tabs in the
Scan Setup interface to display other interfaces which are helpful for your
scanning processing.
6. Click the Preview button to perform a preliminary view of the entire image.
When done, a preview image appears in the Preview window.
Do not forget to put the document back into the document feed tray if the
document feeds through the ADF.
7. Go to the "General" panel by clicking the General tab in the Settings
window. Specify the settings for your requirements there.
Select the image type in the Document
a)
Type as your input image type.
–
Select Photo to scan color prints.
–
Select Text to scan text.
b)
If necessary, check "Remove Blank Page" and "Remove Punch Hole" to
enhance the quality of the scanned images.
8. If necessary, go to the "Image Process" panel by clicking the Image Process
tab in the Settings window. Use the image correction tools presented there
to enhance the image quality according to your specific requirements.
9. Click the OK button to close the Scan Setup interface and return to the Main
interface of ScanWizard DI.
ArtixScan DI 2015c User's Manual
19
Advertisement
Table of Contents
