Dell EC280 Owner's Manual page 56

System
Boot Sequence
System Info
Drives
Primary IDE Master
Primary IDE Slave
SMART Reporting
(Off default)
Onboard Devices
Integrated NIC
(On default)
Video
Graphic Memory Size
(32 MB default)
Security
Admin Password
(Not Set default)
System Password
(Not Set default)
56
Appendix
The computer attempts to boot from the sequence of devices specified in this
list.
Lists the computer name, BIOS Version and Service Tag. None of these fields
can be modified.
Identifies, enables and disables the drives attached to the IDE connectors on the
system board and lists the capacities for the hard drives.
Identifies, enables and disables the drives attached to the IDEconnectors on the
system board and lists the capacities for the hard drives.
This setting determines whether integrated drive errors are reported or not
during system startup.
Enables or disables the integrated NIC controller. Settings are Off or On w/ PXE.
When the On w/ PXE setting is active, if a boot routine is not available from the
network server, the computer attempts to boot from the next device in the boot
sequence list.
This setting configures the amount of system memory that is reserved for the
integrated video controller. The settings are 32 MB, 64 MB, or 128 MB.
Displays the current status of your system setup program's password security
feature and allows you to verify and assign a new admin password.
Displays the current status of the system's password security feature and allows a
new system password to be assigned and verified.