NOTICE:
Work on a level, protected surface to avoid scratching either the computer or the surface on which it
rests.
2 Lay your computer horizontally, with the computer cover facing up.
NOTICE:
Be careful when opening the computer cover to ensure that you do not accidentally disconnect cables
from the system board.
3 Remove the two screws from the back of the computer, as shown in the following image.
4 Slide the cover back about 10mm (2/5"), then lift it off vertically.
5 Set the cover aside on a soft nonabrasive surface.
1
1 cover screws
Removing and Installing Parts
39