Closing A Session; From The Remote Workstation; From The Target Service Processor - IBM 950 User Manual

Closing a Session

From the Remote Workstation

In the Session pull-down menu on the DCAF panel action bar, click Stop a
session.

From the Target Service Processor

To close the session of the target service processor, use the DCAF hot keys,
Note: When your DCAF session is finished, make sure that SDLC link is
disconnected. This frees SDLC resources for other tasks.
8-2
3746-950: User's Guide
Attention
Do not close the session by deselecting Enable DCAF Link/Operations in the
Service Processor (SP) Customization panel of the MOSS-E.
pressed together.