Table of Contents
Advertisement
Configuring the Remote Workstation Modem
Table 9-3 gives the page number of the CS/2 (or CM/2) configuration procedure
that corresponds to your service processor (6275, 3172, or 7585).
Procedures for Service Processors 6275, 3172, 7585
1. In the table, find the row with the service processor modem, connection type
and mode.
2. Find the column with the remote workstation modem, connection type and
mode.
3. The intersection of the row and column gives the page number of the
procedure that you need to configure in CS/2 (or CM/2).
Table 9-3. IBM Modems for Remote Workstations and Target Service Processors
6275, 3172, and 7585
Connection
Type and
Modem Type
Mode
7855
COM1
7857/7858³
Hayes³
Notes:
1. The procedure for modem 7857 is the same as for modem 7858.
2. AT workstations-compatible modem, serial asynchronous/autosynchronous, via
port connection.
3. For increased data transfer speed, IBM recommends the IBM 7858 modem or a
Hayes Optima compatible modem.
Chapter 9. Using DCAF with a Modem-Attached Remote Workstation
Remote Workstation Modem Type
7855, 7857/7858¹, or Hayes Optima Modem²
"7855 Asynchronous Modem to Service
Processor 6275, 3172, and 7585" on page 9-6
"7857 Asynchronous Modem to Service
Processor 6275, 3172, and 7585" on page 9-11
"Hayes Asynchronous Modem to Service
Processor 6275, 3172, and 7585" on page 9-16
9-5
Advertisement
Table of Contents
