Wb Cordless Handset; Description - Alcatel-Lucent OPENTOUCH ALE-500 User Manual

User Manual
5.2 ALE-160 WB Cordless Handset
To use the Bluetooth® handset, your desk phone must be equipped with ALE-108 Wireless Module. The
Bluetooth® settings menu is displayed only if the module is installed. The Bluetooth® feature must be
enabled.
5.2.1

Description

Power button / Line key
Switch the device on/off: press and hold to switch the device on/off. If voice prompts are
enabled, you hear: "Power On / Power Off".
1
Off-hook/On-hook: press this key to take or terminate a call.
Long press after switching on the device to put the handset in detectable mode (pairing mode).
Switch on the device and hold down the power key for a few seconds.
Mute button
2
During a call, press this key to stop your contact from hearing you.
Volume up and down boutons
+: Increase the volume during conversation by pressing this key in quick succession.
3
-: Decrease the volume during conversation by pressing this key in quick succession.
Super wideband earpiece.
4
Super wideband microphone, with led.
5
LED.
6
Battery compartment.
7
If the Bluetooth® handset is on its base, you do not need to press the Off-hook/On-hook key to take or
terminate the call. Just off-hook/on-hook the Bluetooth® handset
The battery recharges when the Bluetooth® handset is on its base. When you put the handset on its
base, the LED turns on briefly and turns off again when the battery starts to charge. The battery
autonomy is more than 10 hours in conversation, and 50 hours in idle state. Charge the battery for
about 6 hours before initial use.
If you are not going use the handset for a long time, we recommend to switch off the device and
disconnect the battery.
8AL90399ENAAed01 73 /101