Table of Contents
Advertisement
1.2.2 Installing the foot
You can use those three compartments on the back side to fix the phone. Depending on the way you insert the foot
into the compartment, your desk phone will have a different angle:
A
To mount the foot, push it to the right as the arrow indicates in the picture on the left.
To remove the foot, pull it to the left as the arrow indicates until it separates from the phone.
1.2.3 Installing a wired handset
By default, your handset cord is correctly connected to the phone. If you have to replace it:
•
Please refer to the previous section, then plug-in the wired handset to the appropriate connector.
•
Make sure you position and fix the cord correctly in the compartment intended for that purpose.
ALE-2/ALE-3 Basic DeskPhone User Manual 8AL91438ENABed01
45° /50°
B
6
Advertisement
Table of Contents
