Table of Contents
Advertisement
Problem
There are bluish layers on
glasses and dishes.
The dishes are wet and dull.
INSTALLATION
ASSEMBLY
Make sure to position the appliance
with minimum space of 50 mm on
both sides of fully open door.
100
min.
550 mm
•
Keep 5 mm distance between both sides of the
appliance and the cabinet. There are two
possibilities for the cabinet opening for the
appliance.
•
Power cord, drain hose and water supply line
opening. To facilitate a proper installation,
position the opening to the right or the left of the
appliance.
ELECTRICAL CONNECTION
WARNING! Do not use an extension
cord or and adapter plug with this
appliance.
WARNING! Do not cut or remove the
earthing.
The rinse aid dosage is too
high.
The detergent can be the
cause.
A programme without a drying
phase has been selected.
The rinse aid dispenser is emp-
ty.
min.
80
443mm
min.
555mm
Possible cause
WARNING! Make the electrical
connection with the power cord.
For rating voltage check the rating
plate.
WATER DRAIN CONNECTION
•
Connect the water drain hose into a drain pipe
with minimum diameter of 40 mm.
•
Put the water drain hose directly into the sink.
use the special plastic support.
Possible solution
Set the rinse aid dispenser to a
lower position.
Try a different brand of deter-
gent.
Set a programme with a drying
phase.
Fill the rinse aid dispenser with
rinse aid.
max. 600 mm
15
Advertisement
Table of Contents
