Related Manuals for Zanussi ZDM17301SA
Summary of Contents for Zanussi ZDM17301SA
- Page 1 User Manual GETTING STARTED? EASY. ZDM17301SA ZDM17301WA EN User Manual Dishwasher...
-
Page 2: Safety Information
VISIT OUR WEBSITE TO: Get usage advice, brochures, trouble shooter, service and repair information: www.zanussi.com/support SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. -
Page 3: Safety Instructions
Do not change the specification of this appliance. • The operating water pressure (minimum and maximum) must be • between 0.3 (0.03) / 10 (1) bar (MPa) Follow the maximum number of 6 place settings. • If the supply cord is damaged, it must be replaced by the •... -
Page 4: Water Connection
use only a 13 A ASTA (BS 1362) fuse (UK and • The following spare parts will be available for 7 Ireland only). years after the model has been discontinued: motor, circulation and drain pump, heaters and WATER CONNECTION heating elements, including heat pumps, piping and related equipment including hoses, valves, •... -
Page 5: Product Description
PRODUCT DESCRIPTION GENERAL OVERVIEW Salt container Inlet hose connection Detergent dispenser Mains cable Rinse aid dispenser Basket Spray arm Cutlery basket Filters Inlet hose Rating plate Funnel Drain hose... -
Page 6: Control Panel
CONTROL PANEL CONTROL PANEL On / Off Delay start Programme indicators Programme Indicators Start / Pause Display INDICATORS Indicator Description It is on when the rinse aid dispenser needs refilling. It is always off while the pro- gramme operates. It is on when the salt container needs refilling. It is always off while the programme operates. -
Page 7: Consumption Values
Degree of soil Detergent pre-wash / Programme Programme phases Rinse aid Type of load main wash (g) Normal or light soil- • Dishwash 45 °C ing, glasses, crystal, • Rinse 60 °C - / 18 fine china • Drying Fresh soiling, coffee •... -
Page 8: Cancelling A Programme
3. Press the On / Off button to activate the INTERRUPTING A PROGRAMME appliance. 1. Open the appliance door. 4. Press Programme button until the indicator of The appliance stops. the selected programme comes on. 2. Close the appliance door. 5. -
Page 9: The Water Softener
THE WATER SOFTENER The water softener should be adjusted according to the hardness of the water in your area. Your local The water softener removes minerals from the water water authority can advise you on the hardness of supply, which would have a detrimental effect on the water in your area. -
Page 10: Filling The Detergent Dispenser
FILLING THE DETERGENT DISPENSER Refill the detergent dispenser before CAUTION! Use only detergents for each wash cycle. dishwashers. USING DETERGENT, SALT AND RINSE AID 1. Press the release button to open the lid of the SEPARATELY detergent dispenser. 1. Fill the salt container and the rinse aid dispenser. -
Page 11: Hints And Tips
HINTS AND TIPS GENERAL USING SALT, RINSE AID AND DETERGENT Follow the hints below to ensure optimal cleaning • Only use salt, rinse aid and detergent designed and drying results in daily use and to protect the for dishwasher. Other products can cause environment. -
Page 12: Care And Cleaning
• Make sure that the spray arms can move freely before you start a programme. • Let the tableware cool down before you remove it from the basket. Hot items can be easily • Make sure that glass items do not touch each damaged. -
Page 13: Internal Cleaning
• Only use neutral detergents. REMOVAL OF FOREIGN OBJECTS • Do not use abrasive products, abrasive cleaning Check the filters and the sump after each use of the pads or solvents. dishwasher. Foreign objects (e.g. pieces of glass, plastic, bones or toothpicks, etc) decrease the INTERNAL CLEANING cleaning performance and can cause damage to •... - Page 14 Problem Possible solution The anti-flood device is on and an • Close the water tap and contact an Authorised Service intermittent acoustic signal sounds Centre. for approximately 30 seconds. The display shows E4. Technical malfunction of the appli- • Contact an Authorised Service Centre. ance.
-
Page 15: Installation
Problem Possible cause Possible solution There are bluish layers on The rinse aid dosage is too Set the rinse aid dispenser to a glasses and dishes. high. lower position. The detergent can be the Try a different brand of deter- cause. -
Page 16: Technical Data
FINAL CHECK The water drain hose must be less than 600 mm from the bottom of the appliance to prevent Before you turn on the dishwasher check if: problems during the draining phases. • The appliance is levelled and fixed properly. Remove the sink plug when the appliance drains •... - Page 20 M10001034-A-392021...