Clarion NX501 Owner's Manual & Installation Manual page 129

3. If you already have a route, tap
4. The first line is the start of the route, normally the current GPS position. Tap
your action at the warning message.
5. The Destination menu appears and you can select the start point of the route the same way you
select a destination.
6. When the new start point is set, tap
7. The map returns with a transparent Vehimarker (showing that there is no GPS reception). If an
active route already existed, it is now recalculated starting from the selected location.
.
. If you are starting a new route, tap
.
NX501/NZ501 English 60
and confirm