Obtaining The Phone Book Data; Telephone Operations - Clarion NX501 Owner's Manual & Installation Manual

2-din dvd multimedia station with built-in navigation & 6.2" touch panel control
Hide thumbs Also See for NX501:
Table of Contents

Advertisement

2. Touch the currently connected device, then press
[
] key to disconnect the active device.
3. Touch the desired Device key you wish to use.
Press [
] key to select it as your active device.
The corresponding cellular phone is set as the current
telephone.
• If the power of the cellular phone is not turned on,
turn it on.
• The cellular phone may prompt to acknowledge the
Bluetooth connection or to enter the Pass Key code
of this unit. Perform these operations according to the
message displayed.
4. Touch the [
] key to return to the previous
screen.

Obtaining the Phone Book data

Sending the Phone Book data from the cellular phone
enables you to make a call using the Phone Book
function from this unit.
1. Perform the Object Push transfer operation of the
Phone Book data on the current cellular phone.
For details of the operation, see the operation manual
of the cellular phone.
Note:
• Some cellular phones may not be able to transfer the
Phone Book data.
• Some cellular phones cannot transfer the Phone
Book data when the hands-free mode is set or it is also
registered in the Bluetooth mode. In those cases, disable
these functions from the cellular phone before performing
the Object Push transfer.
• Some cellular phones may transfer Phone Book data
automatically.

Telephone operations

Making a call using the Ten-Key pad
1. Touch the [
] key to display the Ten-Key pad
screen.
2. Enter the telephone number by using the Ten-Key
pad displayed on the screen.
3. Touch the [
] (Send) key to call the entered
number.
• The following Telephone Interrupt screen is displayed
during phone call.
• Touch the [ ] key to talk by using the cellular phone
and canceling the hands-free function (Private Mode).
To return to the hands-free mode, touch the [ ] key
again.
•Touch the [ ] key to mute the microphone.Now you
can hear the other side, but the other side cannot hear
your side.
•Touch the [ ] key to hold the current phone call, now
you can answer to the other incoming call. Touch again
to talk with previous call
4. When the call is finished, touch [
] key to hang
up.
Note:
• Depending on some special cellular phone, the
Telephone Interrupt screen may be closed and the
connection with this system may be disconnected when
entering the Private mode.
Making a call using the Phone Book
You can use the Phone Book data obtained from the
cellular phone to make a call from this unit.
Note:
• Before using this function, the Phone Book data
must be sent from the cellular phone.
• Only the Phone Book items with at least one
telephone number registered in the captured Phone
Book data are displayed on the Phone Book screen.
1. Touch the [
] key to display the Phone Book
screen.
2. Touch the desired Name key you wish to dial.
• Flick the list up and down to scroll the list.
3. Touch the [
] key to call the specified number.
The Telephone Interrupt screen is displayed, and
calling starts.
• When the call is finished, touch the [
] key to
hang up.
Making a call using the History
The system will memorize the Dialed/Received calls
41
NX501/NZ501

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nz501

Table of Contents