Entering The Coordinate Of The Destination - Clarion NX501 Owner's Manual & Installation Manual

4. A full screen map appears with the selected point in the middle. If necessary, tap the map
somewhere else to modify the destination. The Cursor (
destination.
5. After a short summary of the route parameters, the map appears showing the entire route. The
route is automatically calculated. Tap

3.1.7 Entering the coordinate of the destination

You can also select a destination by entering its coordinate. Do as follows:
1. If you are on the Map screen, tap
2. In the Navigation menu, tap
3. Tap .
4. You can enter the latitude and longitude values in any of the following formats: decimal degrees;
degrees and decimal minutes; or degrees, minutes and decimal seconds.
5. (optional) If necessary, tap
in UTM format.
to confirm the destination, or tap
and start your journey.
) appears at the new location. Tap
to modify route parameters, or tap
to return to the Navigation menu.
.
then
to select a different
and enter the coordinate
NX501/NZ501 English 54