Navigate To A Location Stored In A Photo - Clarion NX501 Owner's Manual & Installation Manual

6. When finished, tap
7. A full screen map appears with the selected point in the middle. If necessary, tap the map
somewhere else to modify the destination. The Cursor (
destination.
8. After a short summary of the route parameters, the map appears showing the entire route. The
route is automatically calculated. Tap

3.1.8 Navigate to a location stored in a photo

You can also set the location stored in a photo as your destination. Do as follows:
1. If you are on the Map screen, tap
2. In the Navigation menu, tap
3. Open the
4. The list of photos stored in the device appears. Select one photo from the list.
5. A full screen map appears with the selected point in the middle. If necessary, tap the map
somewhere else to modify the destination. The Cursor (
55 NX501/NZ501 English
.
to confirm the destination, or tap
and start your journey.
menu and tap
) appears at the new location. Tap
to modify route parameters, or tap
to return to the Navigation menu.
.
.
) appears at the new location. Tap
to select a different