Dvd Video Player Operations; Change Dvd System Settings; Watching To A Disc - Clarion NX501 Owner's Manual & Installation Manual

2-din dvd multimedia station with built-in navigation & 6.2" touch panel control
Hide thumbs Also See for NX501:
Table of Contents

Advertisement

8. DVD VIDEO PLAYER OPERATIONS

Change DVD System Settings

Note: If the set up operation is performed in the
middle of DVD video play, the disc will restart from the
beginning.
Selecting DVD Set Up Menu
1. Press the [Setting] button on the Main Menu to
access the Video set up menu.
2. Press [Video] button. The video menu is displayed.
Setting up the Screen Size
Press the [DVD Wide Screen Mode] button to turn on
or turn off the DVD wide screen mode.
The factory default setting is "On"
Note: Not all DVD disc supports this function.
DVD Wide Screen Mode On
DVD Wide Screen Mode Off
Setting up the password for parental level
control
The factory default pass code is "0000".
1. In Main Menu press [Setting] button. Press [Others]
button on the display. Touch the [Set Password] ----
and a numerical key pad will appear.
Input the old password,and touch the [OK] key,or
input "4356" to reset password.
Input a new password,and touch the [OK] key.
Input the same new password again,and touch the
[OK] key.
Note: When a disc with view restrictions is inserted, you
will be prompted to input this password. The disc will not
be viewable until the correct password is entered.
Set rating for parental level control
1. Select Others screen while in Setting mode. Press
[Parental Control] button. Press the desired rating for
level control. Use this table to set the parental level.
Kid Safe
Kid Safe
G
General Audiences
PG
Parental Guidance Suggested
PG-13
Parents Strongly Cautioned
PG-R
Parental Guidance Restricted
R
Restricted
NC-17
No One 17 And Under Admitted
Adult
Only Adult
• The contents that the parental level restricts vary
with the country code.
Note: The rating can be selected only under the
password unlocked status, and the limits can be set only
under the password locked status.

Watching to a disc

1. To load a disc:
Insert the disc into the center of the insertion slot the
label side facing up.
Note:
• Never insert foreign objects into the disc insertion slot.
• If the disc is not inserted easily, there may be another
disc in the mechanism or the unit may require service.
• 8cm (single play) discs cannot be used.
19
NX501/NZ501

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nz501

Table of Contents