Specifying/Cancelling Double Width Large Characters/Esc W; Specifying/Cancelling Double Height Large Characters/Esc W - Citizen PD 22 PD-22 PD-22 Command Reference Manual

Specifying/cancelling double width large characters/ESC W

[ASCII]
[Decimal]
[Hexadecimal]
[Parameter]
[Description]
● Specifies the double width large characters.
● Specifies the double width large characters when n=1 or "1".
● Cancels the double width large characters when n=0 or "0"
● The double width large characters specified by this code cannot be cancelled with DC4 code or line feed.
● The double width large characters specified by SO, ESC SO can be cancelled with ESC W 0.

Specifying/cancelling double height large characters/ESC w

[ASCII]
[Decimal]
[Hexadecimal]
[Parameter]
[Description]
● Specifies the double height large characters.
● Specifies the double height large characters when n=1 or "1".
● Cancels the double height large characters when n=0 or "0".
ESC W n
27 87 n
1B 57 n
n = 1, 0 or "1", "0"
ESC w n
27 119 n
1B 77 n
n = 1, 0 or "1", "0"
- 73 -