Writing the printer's internal setting to flash memory / ESC~SS
[ASCII]
[Decimal]
[Hexadecimal]
[Description]
● Writes the internal setting of the printer to flash memory.
● Do not use this command together with other print commands because it writes data into the flash memory.
● After data are stored in the flash memory, the printer power is automatically turned OFF. The set values
become effective when the power is turned ON again.
● Be sure to use this command in conjunction with factory setting (ESC~SF) or default value (ESC~SL). If
this command is used separately, unexpected values may be set.
ESC
~
S
27
126
83
1B
7E
53
S
83
53
41