Setting Print Density/ Fs I - Citizen PD 22 PD-22 PD-22 Command Reference Manual

Setting print density/ FS I

[ASCII]
[Decimal]
[Hexadecimal]
[Parameter]
[Description]
●
Specifying the printing density.
n=30h -2 (light)
n=31h -1 ↑
n=32h 0 (Normal)
n=33h +1 ↓
n=34h +2 (dark)
● Settings other than the above will be ignored.
● Can be set by line unit (except in page printing mode).
● The initial value at power-on (default) is the value that is set as print density in the internal setting of the printer.
● Print density setting values return to default when an Initialize command is executed or print mode is changed.
FS I n
28 73 n
1C 49 n
n = 0, 1, 2, 3, 4 or "1", "2", "3", "4"
16