Table of Contents
Advertisement
3.12 58-mm Width Roll Paper Partition
1.
Turn off the power.
2.
Push down the cover open lever to open the paper cover.
3.
Mount the supplied partition to the groove. When using the 80-mm width roll paper,
remove the partition.
4.
Change the print area width while referring to "Manual Setting of Memory Switches" in
Section 5.3.
CAUTION
When using 58-mm width media, be sure to mount the partition.
When opening the paper cover, be careful not to touch the entrance of the blade of the auto
cutter.
The print head is very hot immediately after printing. Be careful not to touch it with your
hands.
Do not touch the print head with bare hands or metal objects.
When using 58-mm wide paper, use the printer as a dedicated printer for that paper size.
The printer may not correctly feed paper or print if it is switched to 80-mm wide paper after
using 58-mm wide paper.
Refer to 5.3 Manual Setting of Memory Switches
Refer to PRECAUTIONS IN HANDLING THE PRINTER
48
—
—
Advertisement
Table of Contents
