Specifying Print Density - Citizen Model CMP-10 Command Reference Manual

ESC Y n
[Function]

Specifying print density

[Code] <1B>H<59>H<n>
[Range] {0 =< n =< 5(Hex)}
[Outline] Specifies the print density.
"n" means the followings.
[Caution] Higher density may lead to slower printing.
Increasing the density allows Low battery to be detected easily.
[Default] n = 3 (100%)
[Sample Program]
PRINT #1, CHR$ (&H1B) + "Y" + CHR$ (0);
PRINT #1, "AAAAA";
PRINT #1, CHR$ (&H1B) + "Y" + CHR$ (5);
PRINT #1, "AAAAA" + CHR$ (&HA);
n (Hex)
0 70 % density
1 80 % density
2 90 % density
3 100 % density
4 120 % density
5 150 % density
Condition
— 30 —