Setting print density/ FS I
[ASCII]
[Decimal]
[Hexadecimal]
[Parameter]
[Description]
●
Specifying the printing density.
n=30h -2 (light)
n=31h
-1 ↑
n=32h
0 (Normal)
n=33h
+1 ↓
n=34h
+2 (dark)
● Settings other than the above will be ignored.
● Can be set by line unit (except in page printing mode).
● The initial value at power-on (default) is the value that is set as print density in the internal setting of the printer.
● Print density setting values return to default when an Initialize command is executed or print mode is changed.
FS
I
n
28
73
n
1C
49
n
n = 0, 1, 2, 3, 4 or 30h, 31h, 32h, 33h, 34h
17